VirtualGlobalPhone - FreePBX configuration

Step 1 ADD VirtualGlobalPhone SIP TRUNK

Follow steps below to add SIP Trunk:

1. Click Connectivity menu.
2. Select Trunks.
3. Click Add Trunk button.
4. Select `Add SIP (chan_sip) Trunk
5. Enter name of the trunk as VirtualGlobalPhone
6. Switch to sip Settings tab.
7. Switch to Outgoing panel.
8. Enter VirtualGlobalPhone as Trunk Name.
9. Enter the following into PEER Details field : sip.virtualglobalphone.com
10. Switch to Incoming tab.
11. Enter the following into Register String:

sipusername:sippassword@sip.virtualglobalphone.com

PEER DETAILS will contain the below.

type=peer

host=sip.virtualglobalphone.com

context=from-trunk

qualify=yes

defaultuser=sip_username   ; <- replace with your Outbound SIP Username [ You would have recevied in the email which contains your phone number ]

remotesecret=sip_password  ; <- replace with your Outbound SIP Password

Step 2 Routing configuration [Outbound route]

Follow steps below to add Outbound route:

1. Click Connectivity.
2. Select Outbound Routes.
3. Click Add Outbound Route button.
4. Enter VirtualGlobalPhone as Route Name
5. Select VirtualGlobalPhone in Trunk Sequence for Matched Routes drop down list.
6. Switch to Dial Patterns tab.
7. Enter ZXXXXXX. to send numbers longer than 7 digits to VIrtualGlobalPhone service.
8. Click Submit button.

Step 3 Routing configuration [INBOUND route]

For each of the Telephone Numbers on your VirtualGlobalPhone account follow steps below to add Inbound route:

1. Click Connectivity.
2. Select Inbound Routes.
3. Click Add Inbound Route button.
4. Enter Telephone Number into Description field.
5. Enter Telephone Number into DID Number field.
6. Set desired destination from the drop down list.
7. Click Submit button.

Note: make sure to click Apply Config button in top right corner of the page to reload your FreePBX configuration.